Let’s
cover some basics of our most popular lubricant products at the hardware store.
WD-40
Ø WD-40 has a new
smart straw. The straw is permanently
attached to the can. Flip it up for a
tight stream. Flip is down for regular
spray action.
Ø WD stands for
water displacement.
Ø WD-40 drives out
moisture from spark plugs, hinges, ignition coils, drills and wiring.
Ø WD-40 cleans gum
off of dashboards and floor mats. It
cleans oil and tar from skin (wash skin thoroughly after use). WD-40 cleans tea stains from
countertops. It removes decals from
plastic. It cleans hand tools. It removes ink from jeans and leather. WD-40 removes rust from plumbing fixtures.
Ø It lubricates
hinges, screws, chains, snow blower chutes and garden tools.
Ø Cautions: WD-40 is not a great contact cleaner. It leaves a sticky residue that attracts
dust. Never use it in locks (clean a
lock with isopropyl alcohol; allow it to dry and only use dry graphite in the
lock). WD-40 has oil in it and can stain
some materials.
3
IN 1 OIL
Ø 3 in 1 oil is
good basic lubricants for hinges, pulleys, chains and wheels.
Ø 3 in 1 Oil is
especially good for metal on metal.
Ø It is primarily
made up of light oil and petroleum oil.
Ø It can protect
against rust.
Ø Cautions: It can
stain some materials and can attract dirt and dust.
LIQUID
WRENCH
Ø Liquid Wrench is
made up of penetrating solvents that do an excellent job of freeing up nuts and
bolts that are difficult to remove.
Ø Liquid Wrench is
not good for long term lubrication or protection.
For
anyone wanting to lubricate rubber, you need to use a plumber’s grease. A petroleum based lubricant will soften and swell
rubber, shortening it’s life.
For more tips visit www.askthehardwareguy.com
No comments:
Post a Comment